CNC Accessories
Showing all 23 results
-
Bearings, CNC Accessories
10mm Linear Bearing with Housing
Model: SC10 UU
Material: Bearing Steel
Bore Size: 10mm
Tolerance: 0 – 0.009
Weight: 92g
Dimension: H-20mm,W-40mm,L-35mm
Used in CNC machines, linear stages, 3D printers and other devices that utilize 10mm diameter linear shafts.SKU: MEC-0001 -
CNC Accessories
2 Axis laser Control Board
This control board is a 32-bit MCU control board, which runs faster, the maximum no-load speed reaches 40000mm/min, the algorithm is optimized better, the vibration is smaller when the machine moves at high speed, and the performance is more stable
Using the Type-C USB interface, it is more convenient to use and the data transmission is more stable;
One-piece integrated drive
PWM output frequency 10kHz, higher engraving precision and clearer details
Y-axis dual drive, stronger drive capability;
Support USB automatic identification, when plugged in USB and connected to the computer, the offline interface is automatically shielded to avoid offline interference with data;
5V power output port, and software controllable, easy to expand various functions;
Support USB flash firmware, firmware upgrade is more convenient;
XY limit switch interface each
Self-contained laser anti-burn mode, laser S value >=100, after the laser is turned on, if there is no movement within 5S, an alarm will occurSKU: CNC-0021 -
CNC Accessories
3 Axis laser controller
Control Axes: X, Y, Z
Microcontroller: 32-bit (usually STM32 or ESP32) or 8-bit (ATmega328p for GRBL 1.1)
Motor Drivers: Built-in (like A4988, DRV8825, or TMC2209) or external driver support
Laser Output Control: PWM (0–5V), TTL compatible
Power Input: 12V or 24V DC
Software Compatibility: GRBL 1.1 compatible → works with LightBurn, LaserGRBL, Candle
Connectivity: USB (Type B or Type-C), sometimes Wi-Fi for ESP32 models
Expansion Ports: Limit switches, probe, cooling fan, spindle enable, laser enable
Offline Control (Optional): Can connect to an offline display module (with SD card reader)SKU: CNC-0022 -
Accessories, CNC Accessories
4 Axis laser controller
CNC Laser Control Board 4 axis with 1.8 inch Offline Controller
Supports SD/TF memory card
Supports Multiple File Formats: supports NC, NCC, TAP, TXT, Gcode, GCO, NL, CUT, CNC caters to diverse CNC machining needs.
Navigate through menus and settings with ease using the intuitive offline controller, designed for both novices and experts.
Mach3 CNC Control Software|Cnc Rough|4 Axis Offline Capability: Seamlessly control 4-axis CNC machines with the CNC GRBL Offline Controller, ensuring precise and efficient milling and carving.
Adjustable PWM Duty Cycle: allowing for precise control over laser power and spindle speed.SKU: CNC-0023 -
CNC Accessories
4mm Router End Mill
4mm Router End Mill – Solid Carbide, 2-Flute, High Precision
High-performance 4mm solid carbide router bit with 2 flutes. Designed for high-speed cutting, engraving, and milling on wood, plastic, aluminum, and composite materials. Perfect for CNC routers and engraving machines.Specifications
Feature Details
Product Type Router End Mill
Material Solid Carbide
Diameter 4 mm
Shank Diameter 4 mm
Flute Type 2-Flute
Cutting Length 10–15 mm (varies by manufacturer)
Overall Length ~40–50 mm
Coating Uncoated or TiN / TiAlN (varies by version)
Cut Direction Up-cut / Down-cut (specify variant)
Application Wood, MDF, Acrylic, PVC, Plastic, Aluminum
Machine Compatibility CNC Router, Milling Machine, Engraving MachineSKU: NEO-0003 -
CNC Accessories, Spindle Motor
500W (0.5KW) Spindle
500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving
CNC Spindle kit 500W:1 x 500W Air-Cooled Spindle Motor
1 x 110V Speed Governor with MACH3
1 x 52mm Mount bracket
13 x ER11 collect
4 x ScrewsSKU: CNC-0006 -
CNC Accessories
6mm Router End Mill
6mm Router End Mill – Solid Carbide, 2-Flute, Precision Cutting
Durable 6mm solid carbide router bit with 2 flutes for clean, efficient milling on wood, plastics, aluminum, and composites. Ideal for CNC routers and engraving machines.Feature Details
Product Type Router End Mill
Material Solid Carbide
Diameter 6 mm
Shank Diameter 6 mm
Flute Type 2-Flute
Cutting Length 15–20 mm (varies by manufacturer)
Overall Length ~50–60 mm
Coating Uncoated or TiN / TiAlN (optional)
Cut Direction Up-cut / Down-cut (varies)
Suitable Materials Wood, MDF, Acrylic, Plastic, Aluminum
Machine Compatibility CNC Router, Milling Machine, Engraving MachineSKU: NEO-0004 -
CNC Accessories, Pumps
Air Compressor High Pressure
Airflow Capacity: Adjustable up to 30 L/min
Noise Level: Low noise operation
Vibration: Minimal vibration to ensure stable operation
Voltage: Supports 110V-220V input
Compatibility: Suitable for various laser engravers and cutters
Included Accessories: Comes with necessary connectors and fittingsSKU: CNC-0019 -
CNC Accessories
Air pump(Assist) Medium
Air Pump (Air Assist) is a small, low-pressure air compressor designed to blow a steady stream of air onto the laser cutting or engraving area. This helps remove smoke, dust, and debris, improving cutting quality and preventing material scorching.
SKU: CNC-0018 -
CNC Accessories, DRIVERS
DM542 Driver
Input voltage 18-50VDC.
Output current programmable, from 1A to 4.2A.
Pulse input frequency up to 200 KHz.
Suitable for 2-phase and 4-phase motors.
Automatic idle-current reduction.
Over-voltage, over-current protection.
TTL compatible and optically isolated input.
Support PUL/DIR and CW/CCW modes.
Anti-Resonance, provides optimum torque and nulls mid-range instability.
The DM542 is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with traditional analog drives, DM542 can drive a stepper motor at much lower noise, lower heating, and smoother movement. Its unique features make DM542 an ideal choice for high requirement applications.SKU: MOT-0006 -
CNC Accessories
ER11 Precision Collet Set – AA Grade (4mm / 6mm)
Specifications
Collet Type: ER11
Available Sizes: 4mm or 6mm (selectable variant)
Grade: AA High Precision (≤ 0.005mm runout)
Quantity: 8 pieces per set
Material: Hardened Spring Steel
Clamping Range: Fixed (4mm or 6mm, depending on variant)
Outer Diameter: Approx. 11.5mm
Length: Approx. 18mm
Compatibility: CNC routers, milling machines, engraving machines, spindle motors
Usage: Tool holding, milling, engraving, drilling
Features: Strong grip, low runout, high concentricity, industrial-grade finishSKU: ER11-AA-SET -
CNC Accessories
GRBL Software Offline Desktop CNC Controller Board 3 Axis
Specification:
Display: 1.8-inch screen
Control: X/Y/Z 3-axis GRBL controller
Offline Capability: Supports offline engraving from memory card (no PC needed)
File Types: NC, TAP, TXT, GCODE, CNC, etc.
Storage: 128MB TF/SD card included
Size: 100×40×20mm
Material: Plastic & Acrylic
Spindle & PWM: Adjustable PWM, manual spindle control
Compatibility: All GRBL firmware versions
Buttons: Full XYZ manual jog + spindle control + file navigationSKU: n/a -
CNC Accessories
GRBL Software Offline Desktop CNC Controller Board 3 Axis
Spec
Display: 1.8-inch screen
Control: X/Y/Z 3-axis GRBL controller
Offline Capability: Supports offline engraving from memory card (no PC needed)
File Types: NC, TAP, TXT, GCODE, CNC, etc.
Storage: 128MB TF/SD card included
Size: 100×40×20mm
Material: Plastic & Acrylic
Spindle & PWM: Adjustable PWM, manual spindle control
Compatibility: All GRBL firmware versions
Buttons: Full XYZ manual jog + spindle control + file navigationSKU: CNC-0037 -
CNC Accessories, Idlers
GT2 Timing Idler
GT2 Belt Passive Idler Pulley Aluminum Pulley Bore 5mm with bearing
Color: Silver
Material: Aluminum Alloy
Bore Size: 5mm
Outside Diameter (OD): 17.7mm
Height: 8.5mm
The idler is a good match for the 20T GT2 timing belt pulley driven by stepper motor
It is a Dual Bearing Aluminum Idler Pulley
Use M5 screws to mount this pulley
Idler Pulley Without TeethSKU: MEC-0005 -
CNC Accessories, DRIVERS, LASER ENGRAVING ACCESSORIES
Mach3 USB Interface Board
Supports 4-axis linkage, you can connect four stepper motor drives or servo drives
Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor
Supports automatic probe tool
Supports Emergency input
Supports limit switch
Supports electronic handwheel
Provide up to 12 digital signal inputs
Interference design, imported industrial components, high reliability
Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable
Has 0-10V output port, you can use mach3 software to control the spindle motor speed.
4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device
4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device
1 status LED, indicate connection status on the boardSKU: MIC-0010 -
CNC Accessories
NC Studio 3-Axis CNC Engraving Machine Controller Kit
CNC Engraving Cutting Machine Control Kit 5.4.49 Ncstudio Control Card XHC WHB02 USB Wireless Remote Handle
Features of NC Studio USB Wireless Remote HandlePerformance or characteristic parameters:
WHB02 Wireless Handwheel is a new product for NC studio systems and video cards. widely used in furniture
Production of engraving machines, advertising field processing, stone processing. Used for Weihong NCStudio5.449,
NCStudio8.202 version and so on.
Has a step value indication, easily indicates the step value, displays 1X, 10X for the current sculpture, or a continuous state.
High-speed instructions
Boot indicator light, handle battery undervoltage operation alarm Key Part: Integrated Handle
General Machine Operator Key FunctionFeed adjustment
Start/Pause function
X, Y, Z axis adjustment;
X, Y, Z axis CLEAR function;
floating knife;
Axis on/off function
reversing origins;
return original work piece;
Engrave open file feature, choose file to engrave and much more.
Working Principle:Traditional engraving machine, you work for engraving machine with computer, worker need to cooperate between engraving machine and computer, work inefficiency and operation is inconvenient, and WHB02 wireless controller which is equivalent to hand-held computer operator, standing directly in front of engraving machine, The engraving machine operates normally and brings convenience for work
NC Studio WHB02Functions:supports 3-axis position adjustment
has processing start, stop, machining feed axis adjustment open stop function
View Barrier transmission distance: 60 4 meters
support in the same room, 64 sets of remote control simultaneously, no interference.
low-power design, 2 AAA batteries can be used for 2 months.SKU: MIC-0011 -
CNC Accessories, Stepper Motor
NEMA 17 Stepper Motor
Nema 17 Stepper Motor High Torque 60Ncm
Model: 17HS24-0644S
Motor Type: Bipolar Stepper
Hybride type
Step Angle: 1.8 deg
Holding Torque: 60Ncm
Rated Current/phase: 0.64A
Phase Resistance: 15ohms
Inductance: 32mH ± 20%(1KHz)
Frame Size: 42 x 42mm
Body Length: 80mm
Shaft Diameter: Φ5mm
Shaft Length: 24mm
D-cut Length: 15mm
Number of Leads: 4
Lead Length: 500mm
Weight: 500gSKU: MOT-0001 -
CNC Accessories, Stepper Motor
NEMA 23 Stepper Motor
Model Number: 57HS11242A4D8
Brand New – SUMTOR
Rated Voltage: 5.88V
Type: Hybrid
Current / Phase: 4.2A
Detent Torque: 12N.cm
Motor Weight: 1.5Kg
Phase Inductance: 1.8mH
Rotor Inertia: 800g.cm2
Phase: 2
Phase Resistance: 1.4Ω
Lead Wire: 4
Motor Length: 112mmSKU: MOT-0002 -
CNC Accessories, Stepper Motor
NEMA 34 Stepper Motor
Model:HB860H
Working Voltage: AC 20-70V OR DC 30-100V
Torque: 12.5N.m
Height: 118mm
Shaft length: 32mm
Shaft diameter: 14mm
Electric current: 6A
Pulse frequency: 200HHZ/500KHZ
Communication mode: RS322 serial port and Debug panel Phase connection.
Low heating / high efficiency (quiescent, almost zero current, no fever);
Smooth and accurate (space vector current control algorithm based on feedback encoder and vector smoothing filtering technology) has a good resistance to the low frequency resonance of traditional stepper motor;
High speed response (advanced servo control technology provides powerful torque output, so that the system has very high dynamic response, stepping servo speed up to 600-2000RPM);SKU: MOT-0003 -
Accessories, CNC Accessories
Z-Axis kit
Compatibility: Designed for CNC machines, laser cutters, and 3D printers (e.g., Ender 3, DIY CNC builds)
Components Included: Lead screw or ballscrew, stepper motor (usually NEMA 17 or NEMA 23), motor mount, linear guide rails or rods, couplers, mounting hardware
Travel Range: Typically 100–200 mm
Stepper Motor Voltage: 12V or 24V DC
Lead Screw Pitch: Usually 2 mm or 4 mm (affects resolution and speed)
Material: Aluminum or steel components for rigidity and durability
Weight: 0.5–1.5 kg depending on build
Precision: High accuracy linear motion with minimal backlash when ballscrews are usedSKU: CNC-0020
